Matrix ETERNITY NE, System Manual

Page: 117 / 996

Matrix ETERNITY NE System Manual 107
Default: Speakerphone.
When you select the Headset as the destination, make sure that you enable Connect Headset to the DKP.
The speech path of both, the Headset and the Handset is common. If the Headset is not connected and
you have selected the Headset as the ring destination, the ring will be played on the speaker of the
Handset.
9.
Select the desired Ring Tune according to your/DKP user’s preference. Default: 1.
10.
Set the Ringer Volume to the desired level according to your preference. Default: 5.
11.
To increase/decrease the volume of outgoing speech (Transmit Gain) on the handset of the DKP, set the
Handset Transmit Volume to the desired level, from 0 to 9. Default: 5.
12.
To increase/decrease the volume of incoming speech (Receive Gain) on the handset of the DKP, set the
Handset Receive Volume to the desired level, from 0 to 9. Default: 5.
13.
To increase/decrease the volume of outgoing speech (Transmit Gain) on the headset port of the DKP, set
the
Headset Transmit Volume to the desired level, from 0 to 9. Default: 5.
14.
To increase/decrease the volume of outgoing speech (Receive Gain) on the headset port of the DKP, set
the
Headset Receive Volume to the desired level, from 0 to 9. Default: 5.
15.
To change the Transmit Gain of the Speakerphone MIC Volume, set Hands-free Transmit Volume to the
desired level, from 0 to 9. Default: 5.
16.
To change the Receive Gain of the Speakerphone MIC Volume, set Hands-free Receive Volume to the
desired level, from 0 to 9. Default: 5.
17.
To change the key DTMF Side Tone of the DKP, set the Key Click Volume to the desired level, from 0 to
9. Default: 5
Key Click Volume is the tone you hear as you press the dial pad keys of EON.
18.
To enable DTMF dialing on the DKP, keep the DTMF Generation flag enabled. Default: Enabled.
To disable the flag, clear the check box.
19.
Select the desired DTMF Transmit Level from 0 to 9 for DTMF generation from the DKP. Default: 5.
20.
To use a Headset with the DKP, set Headset Connected? to Yes. Default: No.
Make sure that you connect a Headset to the DKP, if you select Yes.
21.
Select the check box of Auto Answer to enable this feature on the DKP. Default: Disabled.
When you set the “Auto Answer” feature on the DKP, the DKP goes OFF-Hook automatically after a preset
period of time, without the extension user having to pick up the handset or press the speaker or headset
key. When you enable Auto Answer, you must configure the Auto Answer Timer.
22.
If you enabled Auto Answer on the DKP, set the Auto Answer Timer (sec) to the desired value.