812
Matrix ETERNITY NE System Manual
•
Play Beep when Call Taping and Conversation Recording Starts:
This is a common flag for the
features
“Call Taping”
and
“Conversation Recording”
. When this flag is enabled, the system plays Beeps to
the extensions/calling party and extension before it starts taping the call in the common mailbox or
recording the conversation in the extension’s mailbox.
When this flag is disabled, no indication will be given to the opposite party when the call is being taped/
conversation is being recorded. Default: Enabled.
•
Play Feature Tone in place of Dial Tone when Call Forward is Set:
You can select whether the you
want the system to play Feature Tone instead of Dial Tone to the extensions when Call Forward is set on
these extensions. When this flag is disabled, the system will play dial tone to the extension on which Call
Forward is set, whenever the extension goes Off-hook. Default: Enabled.
•
Call Proceeding Tone–Multistage Dialing:
This flag is used in
“Multi-Stage Dialing”
where you need to
configure Pause and Wait for Answer in the Substitute Number string for the number string dialed by the
extension users.
When an extension user makes a call using a Calling Card, and the system dials out the number using the
Multi-Stage, the extension user will get Ring Back Tone twice: first after the system has dialed the Calling
Card Number, and again after the system has dialed out the destination number (called party number).
Thus the extension user will get Ring Back Tone, twice. To avoid this, you may configure the 'Call
Proceeding Tone' to be played by the system when using Multi-Stage Dialing.
You must configure the type of 'Call Proceeding Tone', according to your requirement; whether the
extension user should be connected to the speech path when the Calling Card number is out dialed or
when the called party number is out dialed. You can select any of the following Call Proceeding Tone
options, as per your requirement:
•
Network Tone:
If this option is selected, the extension user will get Ring Back Tone after dialing the
calling card number and again, after the system has dialed the called party number (when the system is
dialing out the number with Pause and Wait for Answer configured in the substitute number string).
•
Pseudo Tone:
If this option is selected, the extension user will get Feature Tone when the user has
completed dialing all the digits. At the end of the tone, the extension user gets connected to the called
party (destination number).
•
Silent:
If this option is selected, the extension user will get Silence (no tone), after the extension user
has completed dialing all digits. After dialing out the called party number in DTMF, the system will
connect the caller to the called party number (destination number).
•
Companding Algorithm:
The companding Algorithm —A law or
law—is automatically selected when
you select
“Region”
for ETERNITY NE. However, if necessary, you may change the default companding
Algorithm that appears in this field. Select the companding Algorithm according to the Regulatory
Requirement of the country where ETERNITY NE is installed.
•
Language of SE, SA Web Interface:
The GUI of ETERNITY NE supports the languages English, Italian,
Spanish, French, German, and Portuguese. When you select
“Region”
for ETERNITY, one of these
languages will be applied as appropriate for the region you selected. For instance, if you selected India,
English will be applied. If you selected Spain, Spanish will be applied. If you selected a country where
none of these languages are the local language, English will be applied.
The language set by the system on Region selection will be applied on the pages of the GUI for every login
session. You can change the default language set on Region selection, by configuring this parameter.
Summary of Contents for ETERNITY NE
