478
Matrix ETERNITY NE System Manual
•
With the necessary configuration done at both locations, when an extension user 201 of ETERNITY at
Location A dials extension 301 of PBX A, the system checks the CUG table to match the dialed digits with
the Route Code and the Dialed Digit Count. As a match is found, it selects the Tie Trunk defined for routing
the Route Code, i.e. CO1.
If the CUG is connected
over IP network
, you must also configure the SIP Trunk as Peer-to-Peer trunk
and configure the Peer-to-Peer Table. See
“Peer-to-Peer Calling”
for instructions.
How to configure
To configure Closed User Group,
•
Open Jeeves.
•
Log in as System Engineer.
•
Click the
Advanced Settings
link.
•
Click the
Closed User Group
link. The Closed User Group Table page opens.
•
In the
Route Code
field, enter the extension numbers of the other PBX in the CUG. Instead of entire
number strings, you can configure a single digit, the starting digit of the extension numbers as Route Code.
A maximum of 16 digits can be configured as Route Code. Default: Blank.
•
Keep the
Strip Digit Count
as ‘
0
’. Default: 0
•
Keep the
Self Route
flag disabled. Default: Disabled.
•
Keep the
LCR
flag disabled. Default: Disabled.
Summary of Contents for ETERNITY NE
