Matrix ETERNITY NE System Manual
229
ETERNITY NE supports the DTMF options:
RTP (RFC 2833)
,
SIP Info
, and
In-Band
. Select the
appropriate option. Default: RTP (RFC 2833).
Echo Cancellation
ETERNITY supports Echo Cancellation for SIP to CO trunk calls and SIP to Digital Trunks (Mobile, SIP) and
Extensions (DKP, SIP). If you want to apply Echo Cancellation,
1.
Select the check box
Echo Cancellation.
Default: enabled.
2.
Set the tail length for echo cancellation for SIP to CO trunks as
Tail Length (msec) for CO
. The echo
cancellation Tail Length for SIP to CO trunks can be 32/64/128 milliseconds. Default: 128 milliseconds.
3.
Set the tail length for echo cancellation for SIP to Mobile/SIP trunks and SIP to DKP/SIP extensions as
Tail Length (msec) for Extensions/Digital Trunks (msec).
The echo cancellation Tail Length for SIP to
Digital Trunks/Extensions can be 32/64/128 milliseconds. Default: 32 milliseconds.
Jitter Buffer
The speed at which voice packets travel through a network depends on the condition of the network. All voice
packets may not come at the same speed. This variation in the delay in receiving packets, known as Jitter, affects
voice quality. Jitter Buffer helps overcome the delay in receiving voice packets and improves voice quality
. Jitter
Buffer receives voice packets, stores them and sends it to the DSP to process it at evenly spaced intervals, thus
improving voice quality.
ETERNITY supports two types of Jitter Buffer:
Static
and
Dynamic
. Static Jitter Buffer's internal delay is static,
whereas, the Dynamic Jitter Buffer's internal delay adapts itself to the jitter in the network.
1.
Select the Jitter Buffer
Type
as
Static
or
Dynamic
.
If you select
Static
Jitter Buffer, configure the '
Minimum Delay
'. The value configured in the Minimum
Delay determines the size of the Static Jitter buffer.
If you select
Dynamic
Jitter Buffer, configure the '
Optimization Factor
' and '
Minimum Delay
'. The
minimum size of the Dynamic Jitter buffer depends on the 'Minimum Delay' configured. The Optimization
Factor determines the rate of adaptation of the Dynamic Jitter Buffer to the jitter in the network.
Summary of Contents for ETERNITY NE
