Matrix ETERNITY NE, System Manual

Page: 821 / 996

Matrix ETERNITY NE System Manual 811
You can set the Time Zone of the system as Working-Hours or Non-Working hours any time you want by
setting the system in the Day Mode or the Night Mode, or let the system operate as per the Time Table
assigned. For more details see
“Day Night Mode” and “Time Tables”
• Emergency Dialing Reporting: When this flag is enabled, the system detects the extension that has
made the emergency call and reports it to the Operator extension. Thus the Operator can know which
extension has made an emergency call. See
“Emergency Detection and Reporting” to know more.
• Replace '+' from CLI: The GSM network presents the calling party number with prefix '+' to the called
party. ETERNITY NE allows you to remove '+' and replace it with an appropriate number string as required.
To do this,
y ou must enable Replace '+' from CLI by selecting this check box.
You may also program the number string with which ‘+’ is to be replaced in the CLI in the Replace '+' from
CLI with the number string field. In this field, enter the number string with which you want to replace '+'
received as prefix of calling party number .
If you keep the number string field blank, ETERNITY NE will remove '+' sign from the CLI of calling party
and present the remaining digits on the CLI of the Called Party.
For example:
The number 919327237228 is received as CLI.
If ‘00’ is configured as the replace string, the CLI number would become 00919327237228
If no replacement string is configured (i.e. left blank), the CLI number would be presented as
919327237228.
• Disconnect DID Call, when Dialed Number is Busy: when this flag is enabled, the DID call will be
disconnected if the landing extension(s) is busy. The DID call will not be routed to the Operator. Default:
disabled.
• Disconnect DID call, when Dialed Number is not Responding: when this flag is enabled the system
disconnects the DID call if there is no reply from the landing destination extension(s). The DID call will not
be routed to the Operator. Default: disabled.
• Disconnect DID call, when caller does not Dial any Digit: when this flag is enabled, the system will
disconnect the DID call if the caller fails to dial a digit within the First Digit Wait Timer. The DID call will not
be routed to the Operator. Default: disabled.
• Play Beep when Raid/Conference/Dial-in Conference begins: This is a common flag for three features
of ETERNITY NE: “Raid” , “Conference-Multiparty” and “Conference Dial-In” . When this flag is enabled,
• the system plays a warning beep to the extension which is being raided by another extension, before
establishing three-way speech.
• the system plays beeps to the other participants in a Dial-In Conference when a new participant joins in
(i.e. dials in to an on-going Dial-In Conference)
• the system plays beeps to the other participants connected in a Multi-Party Conference, when a new
participant is included.
If you disable this flag, no warning Beep will be played in Raid, the existing participants in a Dial-In or Multi-
party conference will not hear any beep tone indicating the addition of a new participant.