manualshive.com logo in svg

Matrix ETERNITY NE, System Manual

Share
Download
Matrix ETERNITY NE System Manual Download Page 693

Matrix ETERNITY NE System Manual

683

Number Patterns

This parameter is related to the features 

“Toll Control” 

and the

 “Dynamic Lock”

. Toll Control allows you to define a 

particular calling permission for each extension, referred to as 'Call Privilege'. A Call Privilege allows the extension 
to call certain areas and restricts it from calling others. The extension can also be restricted from the dialing of 
specific telephone numbers. 

The ETERNITY NE supports the following types of Call Privileges: 

•

No Calls

•

Local Calls

•

Regional Calls

•

National Calls

•

All Calls

•

Limited Calls 

If you want to use Toll Control, define the Local, Regional, National, and any other specific number strings which 
the system should allow to be dialed and restrict from being dialed. For this, you need to configure the Number 
Patterns, for Local, Regional, National and Limited Calls.

•

The Call Privileges 'No Calls' and All Calls’ do not require any number pattern to be configured. 

•

The Call Privilege Type 'Limited Calls' allows the dialing of specific telephone numbers only.

To configure Number patterns,

•

Open Jeeves.

•

Log in as System Engineer.

•

Click the 

Advanced Settings

 link.

•

Click the 

Number Patterns

 link under Advanced Settings.

Summary of Contents for ETERNITY NE





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands