background image

234

Matrix ETERNITY NE System Manual

These options are checked only if you have selected the check box 

Enable SIP over TCP 

in the VoIP 

parameters page. If the SIP over TCP is disabled, all outgoing SIP messages will be transported over UDP 
only.

Send REGISTER Message

1.

Select whether or not the system should 

Send REGISTER Message

 from the SIP trunk. Default: Send 

REGISTER Message is enabled. 

Clear the check box if you do not want REGISTER Message to be sent. 

Add rinstance in REGISTER 

‘rinstance’ is any random value which can be used by the Ethernet Port to fetch its own contact binding, i.e. to know 
the Registration Expiry Timer assigned by the server. 

1.

Select if the system should 

Add 'rinstance' in REGISTER 

message. Default: ‘rinstance’ is enabled.

If you want to remove ‘rinstance’ in REGISTER, clear the check box.

Allow OG Calls without Registration 

By default, the system does not allow outgoing calls to be made if the status of the SIP trunk is 'not registered'.   

1.

To allow outgoing calls to be made from the SIP Trunk even when it is not registered, select the check box 

Allow OG Calls without Registration

Caller ID on Call Transfer

If you set the SIP Trunk mode as 

Peer-to-Peer 

and selected

 Treat Incoming Peer-to-Peer Call 

as 

Station

, you 

may configure Caller ID on Call Transfer.

You can choose whether the system should display the CLI of the ‘Held Party’ or the CLI of the ‘Transferring Party’ 
to the transfer destination extension while the call is being transferred. 

Select the radio button of the desired option. See 

“Calling Line Identification and Presentation (CLIP)”

 to know 

more.

Summary of Contents for ETERNITY NE





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: