Matrix ETERNITY NE System Manual Download

Page: 734 / 996

724

Matrix ETERNITY NE System Manual

How to use

Reminders can be set by the extension users by themselves. The extension users can also ask the Operator to set
the Reminder for them.

If the Voice Mail System (VMS) is installed in the ETERNITY NE, it can offer voice-guided Reminders to extension
users and the Operator.

Voice-guided reminders lead users through a menu, helping them set the alarm in a step-by-step manner.

Voice-Guided Reminders set/canceled by Operator

The Operator can set voice-guided Reminders for extension users

For EON & Extended IP Phones

•

Press DSS Key assigned to 'Remote Voice-Guided Reminder' function.
OR

•

Dial 1072-035

•

Follow Voice Mail System Prompts to set/cancel Reminder.

For SLT

•

Pick up the handset.

•

Dial 1072-035

•

Follow Voice Mail System Prompts to set/cancel Reminder.

•

Replace handset.

Voice-Guided Reminder set/canceled by Extension Users

For EON & Extended IP Phone Users

•

Press the key assigned to Voice-guided 'Reminder' function.
OR

•

Dial 164

•

Follow Voice Mail System prompts.

For SLT Users

•

Pick up the handset.

•

Dial 164

•

Follow Voice Mail System Prompts.

•

Replace handset.

If the SLT of the extension user has a special Reminder function key, s/he can set the alarm using this key.

For SLT with 'Reminders' Key

•

Press 'Reminders' key. (The label on the SLT key may differ from model to model)

•

Follow the Voice Mail System prompts to set/cancel reminders.

Summary of Contents for ETERNITY NE





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNITY NE

Reviews:

Related manuals for ETERNITY NE

Brands by name

Popular brands

Matrix ETERNITY NE, System Manual

Search results

Summary of Contents for ETERNITY NE

Reviews:

Related manuals for ETERNITY NE

Brands by name

Popular brands