manualshive.com logo in svg

Matrix ETERNITY NE, System Manual

Share
Download
Matrix ETERNITY NE System Manual Download Page 149

Matrix ETERNITY NE System Manual

139

VoIP

1.

Click 

[+] VoIP

 to expand.

2.

Keep the check box 

Authenticate REGISTER

 enabled for Authentication of REGISTER Request in SIP 

Messages. Default: Enabled.

3.

Keep the check box 

Authenticate INVITE

 enabled for Authentication of INVITE Request in SIP 

Messages. Default: Enabled.

4.

Keep the check box 

Authenticate SUBSCRIBE 

enabled for Authentication of SUBSCRIBE Request in 

SIP Messages. Default: Enabled.

Make sure that the Authentication ID for the SIP Extension has been programmed, when the above SIP 
Message Options - REGISTER, INVITE, SUBSCRIBE - are enabled.

5.

Select the check box 

Allow Busy Lamp Field (BLF)

33

 Subscription to enable the SIP extension to 

monitor the status of another extension, device or number. Default: Disabled.

6.

Select the check box 

Allow PUBLISH

 to allow the SIP extension user to choose whether or not to show 

their Presence Status to other SIP Extensions. Default: Disabled.

33.

BLF, a typical feature supported by PCM/TDM PBX and Key Telephone Systems, is also supported on SIP Extensions. 

In PCM/TDM PBX and Key Telephone Systems, this feature is typically used by the Operator to monitor the status of another 

extension, i.e. whether it is available, ringing or busy. The status of the other extensions is indicated on the special function keys 

configured on the Operator's console. This helps the Operator decide whether to place the call, or transfer the call to that exten-

sion, or pick up the call ringing on that extension. 

With BLF Subscription enabled on the SIP Extension, the user can monitor the status of another extension, device or number 

within the same Proxy Domain.

Summary of Contents for ETERNITY NE





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands