Matrix ETERNITY NE System Manual Download | Manualshive

Page: 270 / 996

background image

260

Matrix ETERNITY NE System Manual

To assign Voice Mail Auto Attendant Profile to extensions, configure the

Voice Mail Auto Attendant

parameter on

the extensions and Department Groups.

•

For SLT extensions, see

“Voice Mail Auto Attendant”

under

“SLT Extensions”

for instructions.

•

For DKP extensions, see

“Voice Mail Auto Attendant”

under

“DKP Extensions”

for instructions.

•

For SIP extensions, see

“Voice Mail Auto Attendant”

under

“SIP Extensions”

for instructions.

•

For Department groups, see the feature description for

“Department Call”

for instructions.

Assigning Voice Mail Auto Attendant Profiles to Trunks

A Voice Mail Auto Attendant Profile must be assigned to trunks (CO, Mobile, SIP) if you want to use the VMS as
Auto Attendant on the trunk. For this, you must

•

first select Voice Mail Auto Attendant as the destination for Routing Incoming Calls during the Day and
Night.

•

select a Voice Mail Auto Attendant Profile for the trunk.

When Voice Mail Auto Attendant is enabled on a trunk,

•

the VMS answers the external incoming call landing on the trunk.

•

According to the Voice Mail Auto Attendant Profile assigned to the trunk, the VMS greets the caller with the
Greeting relevant to the time of the day, plays the Welcome message programmed for the current Time
Zone (working hours, non-working hours), and offers the different options as per the graph assigned in the
Voice Mail Auto Attendant profile.

•

If the Directly Route to Root Node is enabled in the Profile for the current Time Zone (working hours, non-
working hours), the VMS takes the caller directly to the root node, without playing the greeting and
welcome message.

You can assign different Voice Mail Auto Attendant Profiles (Graph number, Greetings and Welcome Message,
Directly Route to Root Node option) to different trunks.

To assign Voice Mail Auto Attendant Profile to trunks, go to the desired trunk port type,

“CO Trunks”

,

“Mobile

Trunks”

,

“SIP Trunks”,

under

Basic Settings.

•

Configure the parameter

Route Incoming Calls

.

•

Select

Voice Mail Auto Attendant

as destination for incoming calls during the Day and or Night, as

desired.

•

Configure the

Voice Mail Auto Attendant

parameter.

•

Select the auto attendant profile number as

Voice Mail Auto Attendant Profile

number.

See also

“Direct Inward Dialing (DID)”

.

«
...
268
269
270
271
272
...
»

Summary of Contents for ETERNITY NE





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNITY NE

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands