background image

318

Matrix ETERNITY NE System Manual

Configure the following alarm call parameters:

Use Alarm with Snooze: 

Select this check box if you want to use the Snooze function for the Alarm 

Call.

Configurable Alarm Type (Once Only/Daily)

: Disable this flag, by clearing the check box, if you do 

not what the system to provide the Operator and the extension users the option of setting 'Once Only' 
or 'Daily' Alarms. When this flag is disabled, the system will allow only 'Once Only' alarms to be set. 

Configurable Alarm Category (Personalized/Automated): 

Disable this flag, by clearing the check 

box if you do not want the system to provide the Operator the option of setting 'Personalized' or 
'Automated' Alarm calls. When this flag is disabled, the system will follow the 'Automated' Alarm call 
serving mechanism. The Operator will not be prompted to choose between 'Automated' and 
'Personalized' Alarm calls when setting Alarm calls for an extension phone.

Alarm Ring Timer (sec.):

 Change, if required, the time for which the Alarm Call will ring on the 

extension phone and the time for which the Operator phone will ring to notify an unanswered Alarm 
Call. 

Number of Alarm Attempts:

 Increase or decrease, as required, the number of attempts the system 

should make to serve an Alarm call.

Alarm Attempt Interval (minutes):

 Increase or decrease, as required, the time gap between each 

attempt the system makes to serve an Alarm call.

Click 

Submit

 to save settings.

Summary of Contents for ETERNITY NE





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: