Matrix ETERNITY NE System Manual
271
Outgoing Mail Configuration (SMTP)
•
Requires Authentication?:
Select 'Yes' if SMTP server requires authentication for the e-mail service.
By default, it is set to 'No'.
If you enable Requires Authentication, you must also enter the User ID and Password.
•
Enable Secure Socket Layer (SSL)?:
Select 'Yes' to enable SSL, if all data to the SMTP server are to
be transmitted over secure layer. By default, it is set to 'No'.
•
Display Name:
Enter the name to be displayed to the mail recipient in this field. The Display Name
may consist of up to 24 characters (maximum). By default, this field is blank.
•
E-mail ID:
Enter the Email ID provided by your SMTP server in this field. This e-mail ID will appear to
recipients as the originator of the e-mail. The e-mail ID may consist of 64 characters (maximum). By
default, it is blank.
•
User ID:
Enter the User ID provided the SMTP server. User ID is required if you have enabled
Requires Authentication? The User ID may consist of a maximum 40 characters. By default, the field is
blank.
•
Password:
Enter the Password provided by the SMTP server. The User Password can be of maximum
24 characters. By default, it is blank.
•
SMTP Server Address:
Enter the SMTP Server Address here. The SMTP Server Address may have a
maximum of 46 characters. By default, this field is blank.
•
SMTP Server Port:
Enter the SMTP Server Port Service Provider in this field. The valid Port values
are: 25, 587, 465 or in the range of 1024 to 65535. By default, SMTP Server Port is 25.
Timers
•
Connection Timeout Interval:
This is the time duration for which the VMS will wait for a response
from the SMTP server. You may change the Connection Timeout Interval timer, if required. The range
of Connection Timeout Interval timer is 01 to 99 seconds. By default, it is set to 60 seconds.
•
Reconnection Interval:
This is the time duration for which the VMS will wait before attempting to
reconnect with the SMTP server. You may change the Reconnection Interval timer, if required. Range
of Reconnection Interval timer is 01 to 10 seconds. By default, it is set to 10 seconds.
•
Click
Submit
to save SMTP settings.
Test SMTP Settings
•
Click the button
'Click to Test SMTP’
to check if the SMTP Parameters have been configured
correctly.
When you click this button, the alert message will appear:
"Testing SMTP can take up to 99 seconds.
Would you like to continue?"
Click 'OK' button.
The message
"Please refresh the web browser after few seconds to check the test mail status"
will
appear. Click 'OK' button.
Summary of Contents for ETERNITY NE
