8 Katom St., Misgav Industrial Park, 2017400, Israel
Tel: +972-4-9951999; Fax: +972-4-9990287
PM0617.09 - CXE2000/CXE3000 CompletePBX Getting Started Guide (print version)
Page
1
of
2
CXE2000/CXE3000 CompletePBX: Getting Started Guide
Package Contents
CXE2000/CXE3000 (2U 19'' width unit)
Power cord
Support hardware for 19'' cabinet
CompletePBX 5 software preinstalled on
the hardware
Prerequisites
You need a computer equipped with an Internet browser. Firefox is recommended.
Step 1: Earthing the Unit
1)
For safety and performance reasons, it is essential to ground the unit.
Note: Not properly grounding this device will void your warranty!
2)
Use a star washer to securely connect a grounding tab to the grounding screw on the rear
panel.
3)
Using 12-16 gauge wire, connect the grounding tab to a reliable ground.
4)
All Xorcom hardware should be connected to a common grounding point.
Figure 1: Grounding Screw on CXR2000/CXR3000 Rear Panels
Step 2: Powering Up the Unit
1.
Connect a keyboard and a VGA/SVGA screen.
2.
Connect the unit to the LAN.
3.
Connect the power cord to the power input socket on the rear panel
4.
Turn on the power supply - the startup process takes about 1 minute. The startup time depends
on the number of telephony ports installed in your CXR2000/CXR3000 unit.
