L-DALI User Manual
74
LOYTEC
Version 5.2
LOYTEC electronics GmbH
Uncommissioned: The device is not yet commissioned.
Disabled: The device is disabled.
Figure 68: BACnet commissioning Web interface.
In order to execute an action on devices, select the checkbox at the end of the respective
lines. Then choose an action in the drop-down
Action on selected
and click the
Execute
button. Actions that can be executed on all devices are enable and disable. A disabled
device will stop communication on the network until it is enabled again.
Those devices created as commission later can be assigned to physical devices on the
network. The device description displayed beneath the device name can be edited, where
the edit symbol appears. The assignment can be done manually by editing the fields in the
Instance
column and
Address
column (for static device binding). It can also be done by
executing a network scan. Edit the scan options as appropriate for your BACnet network
and click on
Scan
. The scan progress will be displayed and fill the list for
Scanned devices
not in configuration
. An example is shown in Figure 69.
Figure 69: Result of a BACnet scan on the Web interface
To assign a scanned device to an uncommissioned device in the configuration, select the
corresponding device name from the drop-down box in the
Assignment
column. Repeat
that for all other devices and then click the button
Assign
.
5.3.2 Constant Light Controller Bindings
To determine which sensors (occupancy & lux) are used as inputs to and which light groups
are controlled by a constant light controller instance go to the
CLC Bindings
page (see
Again, selected the DALI channel by clicking on the different tabs at the top of the page
labeled
Channel 1
,
Channel 2
, etc.
