LOYTEC L-DALI, User Manual, Page: 285 / 393

L-DALI User Manual 285 LOYTEC
Version 5.2 LOYTEC electronics GmbH
Priority Event Description
14 Frost condition* The sunblind controller enters the frost state if the network variable input
nviFrost is active. When nviFrost becomes inactive the sunblind
controller remains in the frost state for the hold time configured in
nciRainFroOffDly .
The sunblind does not move as long as the sunblind controller is in the
frost state.
13 Wind* The sunblind controller enters the wind alarm state if the measured wind
speed (
nviWind ) exceeds the threshold configured in nciWindLimit .
When the wind speed falls below the threshold the sunblind controller
remains in the wind alarm state for the hold time configured in
nciWindOffDly .
The sunblind remains open while the sunblind controller is in the wind
alarm state.
12 Rain condition* The sunblind controller enters the rain state if the network variable input
nviRain is active. When nviRain becomes inactive the sunblind controller
remains in the rain state for the hold time configured in
nciRainFroOffDly .
The sunblind remains open while the sunblind controller is in the rain
state.
11 Set override request The network variable input nviSetOverride is active (.function
!=SET_NUL). See Section 8.2.9.5 for detail.
10 Override request The network variable input nviSBOverride is switched on. The sunblind
drives to the position specified in nciOverrideValue. See Section 8.2.9.5
for detail.
9 Window open* The window is open: The network variable input nviWindowContact is
active. The polarity of the window contact can be changed via the
configuration property
nciInvWinCon .
The sunblind does not move as long as the window is open.
8 Local control The network variable input nviLocalControl is active. See Section
8.2.9.4 for detail.
7 Group control The network variable input nviGroupControl is active. See Section
8.2.9.4 for detail.
6 Global control The network variable input nviGlobalControl is active. See Section
8.2.9.4 for detail.
5 Scene selection Sunblind scene recalled via network variable input nviScene . See Section
8.2.9.4 for detail.
4 Anti-glare* The sunblind is controlled by the anti-glare algorithm. Only active if
room is occupied. See Section 8.2.9.1 for detail.
3 View protection* The sunblind is controlled by the view protection algorithm. Only active
if room is occupied. See Section 8.2.9.2 for detail.
2 Constant light request* The sunblind is linked to the constant light controller and is controlled
by the museum mode algorithm. Only active if room is occupied. See
Section 8.2.8.11 for detail.
1 Up if occupied* The room is occupied. See Section 8.2.9.8 for detail.
If the room is occupied the sunblind moves up.
0 (lowest) Heat/cool request* The sunblind is controlled by the heating/cooling algorithm. Only active
if room is not occupied. See Section 8.2.9.3 for detail.
Table 25: Sunblind Controller Events and Priority
For events marked with *) a minimum time can be configured via the configuration property
nciAutoEvMinTm . These events will stay active for at least the configured time even if the
event condition disappears before this time expires. In this way the sunblind controller
ensures that the sunblind does not drive too frequently.