L-DALI User Manual
90
LOYTEC
Version 5.2
LOYTEC electronics GmbH
RGBWAF and primary-N colour types are currently not supported.
Figure 85: Scene colour selection for devices supporting colour type XY Coordinates.
In all cases the enter ‘--‘ in the upper value if the dim level shall not be affected when the
scene is recalled and enter ‘--‘ in the lower value if the colour shall not change when the
scene is recalled.
Scenes are stored for each ballast, but are typically recalled for a group. To show only the
ballasts belonging to a certain group select the group in the
Filter
drop down box on the top
of the page.
To test a scene configuration before saving it click on the
symbol. This will dim the
ballasts selected by the current filter to the values configured for the scene.
Scenes can be recalled using DALI buttons or by the L-DALI controller (see 8.2.5.1 and
8.3.3.1).
5.4 Data Management
5.4.1 Data Points
The device’s Web interface provides a data point page, which lists all configured data
points on the device. An example is shown in Figure 86. The data point page contains a tree
view. Clicking on a particular tree item fills the right part of the page with a data point list
of that tree level. A breadcrumb navigation header allows navigating back to an arbitrary
level in the tree.
The data point list displays the data point name, direction, type, data point state, current
value, and a description. All values are updated live. Inactive points are displayed in gray. If
the data point list does not fit on one page, there are page enumerator links at the bottom.
Important data point states and their implications are listed in Table 12. Values can be
directly edited in the list where the pencil symbol appears. Data point structures can be
expanded or collapsed for better overview.
