L-DALI User Manual
153
LOYTEC
Version 5.2
LOYTEC electronics GmbH
7.4.2 Starting Stand-Alone
The L-DALI can also be used without LNS-based tools. In this case, the LINX Configurator
needs to be started as a stand-alone application. Go to the Windows
Start
menu, select
Programs
,
LOYTEC LINX Configurator
and then click on
LINX Configurator
. This
starts the LINX Configurator.
If the L-DALI is not yet connected to the network, go to the
Model
menu and select the
L-DALI model to be configured. If the L-DALI is already connected to the network it is
recommended to connect the configuration software to the L-DALI.
To Connect to an L-DALI Stand-Alone
1.
Select the direct connection method by clicking on the
Connect to device
button
in the tool bar of the main connections window. The connect dialog as shown in Figure
141 opens.
Figure 141: Connection dialog.
2.
To add a new device connection, click on the
New Device Connection
button
or
select an existing connection in the tree on the left-hand side and click on the
Duplicate
button
.
3.
Enter a name for the connection.
4.
Enter the admin password. The default password is ‘loytec4u’ (older firmware versions
used ‘admin’).
5.
Choose a
Connection Type
. Possible options are:
a.
Web service
(recommended): Firewall friendly connection using HTTP.
b.
TCP/IP
: This uses the IP protocols FTP and Telnet to connect to the device.
