LOYTEC L-DALI User Manual Download Page 329

Page: 329 / 393

L-DALI User Manual

329

LOYTEC

Version 5.2

LOYTEC electronics GmbH

OVERRIDDEN

Logical TRUE (1) if the associated DALI channel is controlled via
the button interface (see Section 4.5.2), FALSE otherwise.

Reliability (Read-Only)

The

Reliability

property of this object type may have any of the following values:

NO_FAULT_DETECTED

No fault was detected.

Number_Of_States (Read-Only)

This property has the value 48.

State_Text (Read/Write)

Per default this property contains the strings “

GO TO SCENE X

”, “

STORE SCENE X

”, and

“

REMOVE SCENE X

” respectively.

Profile_Name (Read-only)

This property has the following values:



DALI groups: “

178-http://www.loytec.com/xsd/DALIGroupSceneCtrl/v1

”



DALI channels: “

178-http://www.loytec.com/xsd/DALIChannelSceneCtrl/v1

”

8.3.3.13

Accumulator Object

– Energy usage of DALI group or channel

This object is used to represent the accumulated energy usage of DALI groups and channels
(see Table 33).

Summary of Contents for L-DALI










































































































































































































































































































































































































Search results

Summary of Contents for L-DALI

Reviews:

Related manuals for L-DALI

Brands by name

Popular brands

LOYTEC L-DALI, User Manual

Search results

Summary of Contents for L-DALI

Reviews:

Related manuals for L-DALI

Brands by name

Popular brands