Specify the source MAC filter for this ACE.
Any: No SMAC filter is specified. (SMAC filter status is "don't-care".)
Specific: If you want to filter a specific source MAC address with this ACE, choose this value. A field for entering an SMAC
value appears.
SMAC Value
When "Specific" is selected for the SMAC filter, you can enter a specific source MAC address. The legal format is
"xx-xx-xx-xx-xx-xx" or "xx.xx.xx.xx.xx.xx" or "xxxxxxxxxxxx" (x is a hexadecimal digit). A frame that hits this ACE matches
this SMAC value.
DMAC Filter
Specify the destination MAC filter for this ACE.
Any: No DMAC filter is specified. (DMAC filter status is "don't-care".)
MC: Frame must be multicast.
BC: Frame must be broadcast.
UC: Frame must be unicast.
Specific: If you want to filter a specific destination MAC address with this ACE, choose this value. A field for entering a
DMAC value appears.
DMAC Value
When "Specific" is selected for the DMAC filter, you can enter a specific destination MAC address. The legal format is
"xx-xx-xx-xx-xx-xx" or "xx.xx.xx.xx.xx.xx" or "xxxxxxxxxxxx" (x is a hexadecimal digit). A frame that hits this ACE matches
this DMAC value.
Buttons
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
Auto-refresh:
Activate the auto-refresh to refresh the information automatically.
Refresh
Refresh the ACL configuration manually
Clear
Clear the ACL configuration.
Remove All
Remove all ACL configurations from the table.
3.2.4 ACL Status
The section describes how to shows the ACL status by different ACL users. Each row describes the ACE that is defined.
It is a conflict if a specific ACE is not applied to the hardware due to hardware limitations. The maximum number of
ACEs is 256 on each switch.
Web Interface
To display the ACL status in the web interface:
1. Click Configuration, ACL, then ACL status
2. If you want to auto-refresh the information then you need to activate “Auto-refresh”.
3. Click “Refresh“ to refresh the ACL Status
26
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
