use the last entry of the currently displayed table as a basis for the next lookup. When the end is reached the text "No
more entries" is shown in the displayed table.
Web Interface
To display the IGMP Snooping Group Information in the web interface:
1. Click Configuration, IGMP Snooping, Group Information
2. If you want to auto-refresh the information then you need to activate “Auto-refresh”.
3. Click “Refresh“ to refresh an entry of the IGMP Snooping Groups Information.
4. Click “<< or >>“ to move to previous or next entry.
Figure 3-5.5: The IGMP Snooping Groups Information (GS-2310P)
Parameter description:
Navigating the IGMP Group Table
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the IGMP Group Table. The
will use the last entry of the currently displayed table as a basis for the next lookup. When the end is reached the text
"No more entries" is shown in the displayed table.
IGMP Group Table Columns
VLAN ID:
VLAN ID of the group.
Groups:
Group address of the group displayed.
Port Members:
Ports under this group.
Auto-refresh:
Activate the auto-refresh to refresh the log automatically.
Refresh:
Refresh the IGMP Group Status manually.
<<, >>
Go to the previous/next page or entry.
3.5.6 IPv4 SSM information
Source Specific Multicast (SSM) is a datagram delivery model that best supports one-to-many applications, also known
as broadcast applications. SSM is a core network technology of IP multicast targeted for audio and video broadcast
application environments.
For the SSM delivery mode, an IP multicast receiver host must use IGMP Version 3 (IGMPv3) to subscribe to channel (S,
G). By subscribing to this channel, the receiver host is indicating that it wants to receive IP multicast traffic sent by source
host S to group G. The network will deliver IP multicast packets from source host S to group G to all hosts in the network
that have subscribed to the channel (S, G).
49
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration