Adding new entry:
Click to add a new entry to the Static ARP Inspection table. Specify the Port, VLAN ID, MAC address, and IP address for
the new entry. Click "Save".
Buttons:
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
5.2.3 Dynamic Table
The section describes how to configure the Dynamic ARP Inspection Table parameters of the switch. The Dynamic ARP
Inspection Table contains up to 1024 entries, and is sorted first by port, then by VLAN ID, then by MAC address, and
then by IP address.
To configure a Dynamic ARP Inspection Table Configuration in the web interface:
1. Specify the Start from port, VLAN ID, MAC Address, IP Address, and entry per page.
2. Check “Auto-refresh”.
Figure 5-2.3: The Dynamic ARP Inspection Table
Parameter description:
Port:
Switch Port Number for which the entries are displayed.
VLAN ID:
VLAN-ID in which the ARP traffic is permitted.
MAC Address:
User MAC address of the entry.
IP Address:
User IP address of the entry.
Auto-refresh:
Activate the auto-refresh to refresh the information automatically.
Refresh:
Refresh the Dynamic ARP Inspection Table manually
|<<, >>:
Go to previous/next entry or page.
165
LANCOM GS-2310P/GS-2326(P) User Manual
5 Security
