4. Click Apply.
Figure 4-5.1: The System Log configuration
Parameter description:
Server Mode:
Indicates the server mode. When the mode operation is enabled, the syslog message will be sent out to a syslog server.
The syslog protocol is based on UDP communication and received on UDP port 514 and the syslog server will not send
acknowledgments back to the sender since UDP is a connectionless protocol and it does not provide acknowledgments.
The syslog packet will always be send out even if the syslog server does not exist. Possible modes are:
Enabled: Enable server mode operation.
Disabled: Disable server mode operation.
Server Address 1 and 2:
Indicates the IPv4 host address of the syslog server 1 and server 2 (For redundancy). If the switch provides DNS, it also
can be a host name.
Syslog Level:
Indicates what kind of message will send to the syslog server. Possible modes are:
Info: Send information, warnings and errors.
Warning: Send warnings and errors.
Error: Send errors.
4.5.2 Log
This section describes the system log information of the switch
Web Interface
To display the log configuration in the web interface:
1. Click Syslog, Log.
2. Display the log information.
Figure 4-5.2: The System Log configuration
149
LANCOM GS-2310P/GS-2326(P) User Manual
4 System Configuration
