To scroll to enable or disable the Spanning Tree BPDU Guard function on the Easy Port.
Buttons:
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
3.20 Mirroring
You can mirror traffic from any source port to a target port for real-time analysis. You can then attach a logic analyzer
or RMON probe to the target port and study the traffic crossing the source port in a completely unobtrusive manner.
Mirror Configuration is used to monitor the traffic of the network. For example, we assume that Port A and Port B are
Monitoring Port and Monitored Port respectively, thus, the traffic received by Port B will be copied to Port A for monitoring.
Web Interface
To configure the Mirror in the web interface:
1. Click Configuration, Mirroring
2. Select Port to mirror on which port
3. Scroll to disabled, enable, TX Only and RX Only to set the Port mirror mode
4. Click Apply to save the setting
5. If you want to cancel the setting then you need to click the Reset button. It will revert to previously saved values.
Figure 3-20.1: The Mirror Configuration (GS-2310P)
Parameter description:
Port to mirror on:
Port to mirror also known as the mirror port. Frames from ports that have either source (rx) or destination (tx) mirroring
enabled are mirrored on this port. Disabled disables mirroring.
Mirror Port Configuration
The following table is used for Rx and Tx enabling.
Port:
133
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
