and DPL value
Buttons:
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
3.14.10 QoS Control List Configuration
The section shows the QoS Control List(QCL), which is made up of the QCEs. Each row describes a QCE that is defined.
The maximum number of QCEs is 256 on each switch. Click on the lowest plus sign to add a new QCE to the list.
Web Interface
To configure the QoS Control List parameters in the web interface:
1. Click Configuration, QoS, QoS Control List
2. Click the to add a new QoS Control List
3. Select the parameters and activate the Port Member to join the QCE rules
4. Click Apply to save the setting
5. If you want to cancel the setting then you need to click the Reset button. It will revert to previously saved values
Figure 3-14.10: The QoS Control List Configuration
Parameter description:
QCE#:
Indicates the index of QCE.
Port:
Indicates the list of ports configured with the QCE.
Frame Type:
Indicates the type of frame to look for incoming frames. Possible frame types are:
116
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration