Group Name: The name of the group. The maximum length is 64 characters.
Buttons:
Apply – Apply changes.
Reset – Undo any changes made locally and revert to previously saved values.
3.18.2 Information
Web Interface
To display the active slave information in the web interface:
1. Click Configuration, Single IP, Information
2. Click Refresh to update the single IP information manually or enable auto-refresh
Figure 3-18.2: The Single IP Information
Parameter description:
Index: The ID of the active slave switch.
Model Name: The Model name of the slave switch.
MAC Address: The MAC address of the slave switch.
Buttons:
Refresh – Refresh the single IP information.
Auto-refresh – Automatically refresh the single IP information at regular intervals.
3.19 Easy Port
Easy Port provides a convenient way to save and share common configurations. You can use it to enable features and
settings based on the location of a switch in the network and for mass configuration deployments across the network.
You could easy to implement included Voice IP phone, Wireless Access Point and IP Camera…etc. Others you can leverage
configuration to run a converged voice, video, and data network considering quality of service (QoS), bandwidth, latency,
and high performance.
Web Interface
To configure the Easy Port in the web interface:
1. Click Configuration, Easy Port.
2. Set the parameters
3. Scroll to Role for what kind device you want to set on the Easy Port and connect to.
4. Click Apply to save the setting
5. If you want to cancel the setting then you need to click the Reset button. It will revert to previously saved values.
Figure 3-19.1: The Easy Port Configuration
131
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
