Working Querier Version currently.
Host Version:
Working Host Version currently.
Querier Status:
Show the Querier status is "ACTIVE" or "IDLE".
Queries Transmitted:
The number of Transmitted Queries.
Queries Received:
The number of Received Queries.
V1 Reports Received:
The number of Received V1 Reports.
V2 Reports Received:
The number of Received V2 Reports.
V1 Leaves Received:
The number of Received V1 Leaves.
Auto-refresh
Activate the auto-refresh to refresh the log automatically.
Refresh
Refresh the IGMP Group Status manually.
<<,>>
Go to the next/previous page or entry.
3.6.5 Groups Information
This section describes how to set the MLD Snooping Groups Information. The "Start from VLAN", and "group" input
fields allow the user to select the starting point in the MLD Group Table
Each page shows up to 99 entries from the MLD Group table, the default being 20, selected through the "entries per
page" input field. When first visited, the web page will show the first 20 entries from the beginning of the MLD Group
Table.
Web Interface
To display the MLD Snooping Group information in the web interface:
1. Click Configuration, MLD Snooping, Group Information
2. If you want to auto-refresh the information then you need to activate “Auto-refresh”
3. Click “Refresh“ to refresh a entry of the MLD Snooping Group Information.
4. Click “Clear“ to clear the MLD Snooping Groups information.
Figure 3-6.5: The MLD Snooping Groups Information (GS-2310P)
56
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
