The Key value incurred by the port, range 1-65535. The Auto setting will set the key as appropriate by the physical link
speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the Specific setting, a user-defined value can be entered. Ports with the
same Key value can participate in the same aggregation group, while ports with different keys cannot.
Role:
The Role shows the LACP activity status. The Active will transmit LACP packets each second, while Passive will wait for
a LACP packet from a partner (speak if spoken to).
Buttons
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
3-3.2.2 System Status
This section describes the LACP System Status which is provided when LACP is configured on the switch.
Web Interface
To display the LACP System status in the web interface:
1. Click Configuration, Aggregation, LACP, System Status
2. If you want to auto-refresh the information then you need to activate “Auto-refresh”.
3. Click “Refresh“ to refresh the LACP System Status.
Figure 3-3.2.2: The LACP System Status
Parameter description:
Aggr ID:
The Aggregation ID associated with this aggregation instance. For LLAG the id is shown as 'isid:aggr-id' and for GLAGs
as 'aggr-id'
Partner System ID:
The system ID (MAC address) of the aggregation partner.
Partner Key:
The Key that the partner has assigned to this aggregation ID.
Last changed:
The time since this aggregation changed.
Local Ports:
Shows which ports are a part of this aggregation for this switch. The format is: "Switch ID:Port".
Auto-refresh:
To activate the auto-refresh to refresh the information automatically.
Refresh
Refresh the LACP System status information manually.
31
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration