Remap DP1: Select the DSCP value from select menu to which you want to remap. DSCP value ranges form 0 to 63.
There is following configurable parameter for Egress side -
Remap: Select the DSCP value from select menu to which you want to remap. DSCP value ranges form 0 to 63.
Buttons:
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
3.14.9 DSCP Classification
The section describes how to configure and map DSCP value to a QoS Class and DPL value.
Web Interface
To configure the DSCP Classification parameters in the web interface:
1.Click Configuration, QoS, DSCP Translation
2. Set the DSCP Parameters
3. Click Apply to save the setting
4. If you want to cancel the setting then you need to click the Reset button. It will revert to previously saved values
Figure 3-14.9: The DSCP Classification Configuration
Parameter description:
QoS Class:
Available QoS Class value ranges from 0 to 7. QoS Class (0-7) can be mapped to followed parameters.
DPL:
Drop Precedence Level (0-1) can be configured for all available QoS Classes.
DSCP:
Select DSCP value (0-63) from DSCP menu to map DSCP to corresponding QoS Class
115
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
