• Multi 802.1X
• MAC-based Auth.
Last Supplicant/Client Info:
Information about the last supplicant/client that attempted to authenticate. This information is available for the following
administrative states:
• Port-based 802.1X
• Single 802.1X
• Multi 802.1X
• MAC-based Auth.
Selected Counters
Selected Counters:
The Selected Counters table is visible when the port is in one of the following administrative states:
• Multi 802.1X
• MAC-based Auth.
The table is identical to and is placed next to the Port Counters table, and will be empty if no MAC address is currently
selected. To populate the table, select one of the attached MAC Addresses from the table below.
Attached MAC Addresses
Identity:
Shows the identity of the supplicant, as received in the Response Identity EAPOL frame.Clicking the link causes the
supplicant's EAPOL and Backend Server counters to be shown in the Selected Counters table. If no supplicants are
attached, it shows No supplicants attached.
This column is not available for MAC-based Auth.
MAC Address:
For Multi 802.1X, this column holds the MAC address of the attached supplicant. For MAC-based Auth., this column
holds the MAC address of the attached client.
Clicking the link causes the client's Backend Server counters to be shown in the Selected Counters table. If no clients are
attached, it shows No clients attached.
VLAN ID
This column holds the VLAN ID that the corresponding client is currently secured through the Port Security module.
State:
The client can either be authenticated or unauthenticated. In the authenticated state, it is allowed to forward frames on
the port, and in the unauthenticated state, it is blocked. As long as the backend server hasn't successfully authenticated
the client, it is unauthenticated. If an authentication fails for one or the other reason, the client will remain in the
unauthenticated state for Hold Time seconds.
Last Authentication:
Shows the date and time of the last authentication of the client (successful as well as unsuccessful).
Auto-refresh:
Activate the auto-refresh to refresh the information automatically.
Refresh:
Refresh the NAS Statistics manually.
Clear:
180
LANCOM GS-2310P/GS-2326(P) User Manual
5 Security
