3-3.2.3 Port Status
This section describes the LACP Status which is provided when LACP is configured on the switch.
Web Interface
To display the LACP Port status in the web interface:
1. Click Configuration, Aggregation, LACP, Port Status
2. If you want to auto-refresh the information then you need to activate “Auto-refresh”.
3. Click “Refresh“ to refresh the LACP Port Status.
Figure 3-3.2.3: The LACP Status
Parameter description:
Port:
The switch port number.
LACP:
'Yes' means that LACP is enabled and the port link is up. 'No' means that LACP is not enabled or that the port link is
down. 'Backup' means that the port could not join the aggregation group but will join if other port leaves. Meanwhile
its LACP status is disabled.
Key:
The key assigned to this port. Only ports with the same key can aggregate together.
Aggr ID:
The Aggregation ID assigned to this aggregation group. IDs 1 and 2 are GLAGs while IDs 3-14 are LLAGs.
Partner System ID:
The partner's System ID (MAC address).
Partner Port:
The partner's port number connected to this port.
Auto-refresh:
To activate the auto-refresh to refresh the information automatically.
Refresh:
Refresh the LACP port status information manually.
3-3.2.4 Port Statistics
This section describes the LACP Statistics which are provided when LACP is configured on the switch.
Web Interface
To display the LACP Port statistics in the web interface:
1. Click Configuration, Aggregation, LACP, Port Statistics
2. If you want to auto-refresh the information then you need to activate “Auto refresh”.
32
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
