Enable the fast leave on the port.
Throttling:
Enable to limit the number of multicast groups to which a switch port can belong.
Buttons
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
3.5.2 VLAN Configuration
The section describes the VLAN configuration setting process integrated with IGMP Snooping function. For each setting
page shows up to 99 entries from the VLAN table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed
will be the one with the lowest VLAN ID found in the VLAN Table. The "VLAN" input fields allow the user to select the
starting point in the VLAN Table. Clicking the button will update the displayed table starting from that or the next closest
VLAN Table match.
Web Interface
To configure the IGMP Snooping VLAN in the web interface:
1. Click Configuration, IGMP Snooping, VLAN Configuration
2. Activate to select enable or disable Snooping, IGMP Querier
3. Specify the parameters in the blank field.
4. Click the refresh to update the data or click << or >> to display previous entry or next entry.
5. Click Apply to save the setting
6. If you want to cancel the setting then you need to click the Reset button. It will revert to previously saved values
Figure 3-5.2: The IGMP Snooping VLAN Configuration.
Parameter description:
VLAN ID:
It displays the VLAN ID of the entry.
Snooping Enabled:
Enable the per-VLAN IGMP Snooping. Only up to 32 VLANs can be selected.
IGMP Querier:
A router sends IGMP Query messages onto a particular link. This Router is called the Querier. Enable the IGMP Querier
in the VLAN.
Compatibility:
Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating
on hosts and routers within a network. The allowed selection is IGMP-Auto, Forced IGMPv1, Forced IGMPv2, Forced
IGMPv3, default compatibility value is IGMP-Auto.
45
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
