Drop Agent Option:
The number of packets that were dropped which were received with relay agent information.
Auto-refresh:
Activate the auto-refresh to refresh the information automatically.
Refresh:
Refresh the DHCP Relay Statistics manually.
Clear:
Clear the entries.
5.5 NAS
The section describes how to configure the NAS parameters of the switch. The NAS server can be employed to connect
users to a variety of resources including Internet access, conference calls, printing documents on shared printers, or by
simply logging on to the Internet.
5.5.1 Configuration
This section describes how to configure NAS according to IEEE 802.1X, MAC-based authentication system, and port
settings. The NAS configuration consists of two sections, system- and port-wide.
To configure the Network Access Server in the web interface:
1. Select “Enabled” in the Mode of Network Access Server Configuration.
2. Check Reauthentication Enabled.
3. Set Reauthentication Period (Default is 3600 seconds).
4. Set EAPOL Timeout (Default is 30 seconds).
5. Set Aging Period (Default is 300 seconds).
6. Set Hold Time (Default is 10 seconds).
7. Check RADIUS-Assigned QoS Enabled.
8. Check RADIUS-Assigned VLAN Enabled.
9. Check Guest VLAN Enabled.
10. Specify Guest VLAN ID.
11. Specify Max. Reauth. Count.
12. Checked Allow Guest VLAN if EAPOL Seen.
13. Click Apply.
Figure 5-5.1: The Network Access Server Configuration (GS-2310P)
171
LANCOM GS-2310P/GS-2326(P) User Manual
5 Security
