manualshive.com logo in svg

Lancom GS-2310P, User Manual, Page: 14 / 217

Share
Download
Lancom GS-2310P User Manual Download Page 14

Disabled: All power savings mechanisms disabled.

ActiPHY: Link down power savings enabled.

PerfectReach: Link up power savings enabled.

Enabled: Both link up and link down power savings enabled.

Buttons:

Save – Click to save changes.

Reset – Click to undo any changes made locally and revert to previously saved values.

Refresh – Refresh the ports link status manually

3.1.2 Port Description

This section describes how to configure the port’s alias or any descriptions for the ports identity. It provides user the
option to enter an alphanumeric string describing the full name and/or additional information, eg the usage of the port.

Web Interface

To enter a Port Description in the web interface:

1. Click Configuration, Port, then Port Description

2. Specify the detail port alias or description.

3. Click Apply.

Figure 3-1.2: The Port Description (GS-2310P)

Parameter description:

Port:

The logical port number for this row.

Description:

The description of device ports must not include “ # % & ‘ + \.

Buttons

Apply – Click to save changes.

Reset – Click to undo any changes made locally and revert to previously saved values.

14

LANCOM GS-2310P/GS-2326(P) User Manual

3 Configuration

Summary of Contents for GS-2310P


























































































































































































































Reviews:

No comments