manualshive.com logo in svg

Lancom GS-2310P, User Manual, Page: 57 / 217

Share
Download
Lancom GS-2310P User Manual Download Page 57

Parameter description:

Navigating the MLD Group Table

Each page shows up to 99 entries from the MLD Group table, default being 20, selected through the "entries per page"
input field. When first visited, the web page will show the first 20 entries from the beginning of the MLD Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD Group Table.
Clicking the button will update the displayed table starting from that or the next closest.

MLD Group Table match. In addition, the two input fields will - upon a button click - assume the value of the first displayed
entry, allowing for continuous refresh with the same start address. The will use the last entry of the currently displayed
as a basis for the next lookup. When the end is reached the text "No more entries" is shown in the displayed table. Use
the button to start over.

MLD Snooping Information Table Columns

VLAN ID:

VLAN ID of the group.

Groups:

Group address of the group displayed.

Port Members:

Ports under this group.

Auto-refresh:

Activate the auto-refresh to refresh the log automatically.

Refresh

Refresh the IGMP Group Status manually.

<<,>>

Go to the previous/next page or entry.

3.6.6 IPv6 SSM Information

This section describes how to configure the Entries in the MLDv2 Information Table that are shown on this page. The
MLDv2 Information Table is sorted first by VLAN ID, then by group, and then by Port No. Different source addresses
belong to the same group are treated as single entry.

Each page shows up to 64 entries from the MLDv2 SSM (Source Specific Multicast) Information table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will show the first 20 entries from
the beginning of the MLDv2 Information Table. The "Start from VLAN", and "group" input fields allow the user to select
the starting point in the MLDv2 Information Table.

Web Interface

To display the MLDv2 IPv6 SSM Information in the web interface:

1. Click Configuration, MLD Snooping, IPv6 SSM Information

2. If you want to auto-refresh the information then you need to activate “Auto-refresh”.

3. Click “Refresh“ to refresh a entry of the MLDv2 IPv6 SSM Information.

57

LANCOM GS-2310P/GS-2326(P) User Manual

3 Configuration

Summary of Contents for GS-2310P


























































































































































































































Reviews:

No comments