Parameter description:
Port:
The switch port number of the corresponding STP CIST (and MSTI) port.
Path Cost:
Controls the path cost incurred by the port. The Auto setting will set the path cost as appropriate by the physical link
speed, using the 802.1D recommended values. Using the Specific setting, a user-defined value can be entered. The path
cost is used when establishing the active topology of the network. Lower path cost ports are chosen as forwarding ports
in favor of higher path cost ports. Valid values are in the range 1 to 200000000.
Priority:
Controls the port priority. This can be used to control priority of ports having identical port cost. (See above).
Buttons
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
3.4.6 Bridge Status
After you complete the MSTI Port configuration the you could to ask the switch display the Bridge Status. The section
provides a status overview of all STP bridge instances. The displayed table contains a row for each STP bridge instance,
where the column displays the following information:
Web Interface
To display the STP Bridges status in the web interface:
1. Click Configuration, Spanning Tree, STP Bridges
2. If you want to auto-refresh the information then you need to activate “Auto-refresh”.
3. Click “Refresh“ to refresh the STP Bridges.
40
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
