4. Click “<< or >>“ to move to previous or next entry.
Figure 3-6.6: The IPv6 SSM Information
Parameter description:
MLDv2 Information Table Columns
VLAN ID:
VLAN ID of the group.
Group:
Group address of the group displayed.
Port:
Switch port number.
Mode:
Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or
Exclude.
Source Address:
IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128.
Type:
Indicates the Type. It can be either Allow or Deny.
Refresh:
Refresh the MLDv2 Information Table manually.
<<,>>
Go to the previous/next page or entry.
3.7 MVR
The MVR feature enables multicast traffic forwarding on the Multicast VLAN. In a multicast television application, a PC
or a television with a set-top box can receive the multicast stream. Multiple set-top boxes or PCs can be connected to
one subscriber port, which is a switch port configured as an MVR receiver port. When a subscriber selects a channel,
the set-top box or PC sends an IGMP join message to Switch A to join the appropriate multicast. Uplink ports that send
and receive multicast data to and from the multicast VLAN are called MVR source ports.
3.7.1 Configuration
This section describes how to set the MVR basic Configuration.
Web Interface
To configure the MVR in the web interface:
58
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
