DSCP Valid dscp value can be (0-63, BE, CS1-CS7, EF or AF11-AF43)
Buttons:
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
3.14.11 QCL Status
The section shows how to configure and display the QCL status
Each row describes the QCE that is defined. It is a conflict if a specific QCE is not applied to the hardware due to hardware
limitations. The maximum number of QCEs is 256 on each switch.
Web Interface
To display the QoS Control List Status in the web interface:
1. Click Configuration, QoS, QCL Status
2. If you want to auto-refresh the information then you need to activate “Auto-refresh”.
3. Select the combined, static, Voice VLAN and conflict.
4. Click the “ Refresh“ to refresh a entry of the MVR Statistics Information.
Figure 3-14.11: The QoS Control List Status
Parameter description:
User:
Indicates the QCL user.
QCE#
Indicates the index of QCE.
Frame Type:
Indicates the type of frame to look for incoming frames. Possible frame types are:
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC: Only (LLC) frames are allowed
LLC: Only (SNAP) frames are allowed.
IPv4: The QCE will match only IPV4 frames.
IPv6: The QCE will match only IPV6 frames.
Port:
Indicates the list of ports configured with the QCE.
Action:
119
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
