IP Source Guard is a secure feature used to restrict IP traffic on DHCP snooping untrusted ports by filtering traffic based
on the DHCP Snooping Table or manually configured IP Source Bindings. It helps prevent IP spoofing attacks when a
host tries to spoof and use the IP address of another host.
L
LACP
LACP is an IEEE 802.3ad standard protocol. The Link Aggregation Control Protocol, allows bundling several physical
ports together to form a single logical port.
LLC
The IEEE 802.2 Logical Link Control (LLC) protocol provides a link mechanism for upper layer protocols. It is the upper
sub-layer of the Data Link Layer and provides multiplexing mechanisms that make it possible for several network protocols
(IP, IPX) to coexist within a multipoint network. LLC header consists of 1 byte DSAP (Destination Service Access Point),
1 byte SSAP (Source Service Access Point), 1 or 2 bytes Control field followed by LLC information.
LLDP
LLDP is an IEEE 802.1ab standard protocol.
The Link Layer Discovery Protocol(LLDP) specified in this standard allows stations attached to an IEEE 802 LAN to advertise,
to other stations attached to the same IEEE 802 LAN, the major capabilities provided by the system incorporating that
station, the management address or addresses of the entity or entities that provide management of those capabilities,
and the identification of the stations point of attachment to the IEEE 802 LAN required by those management entity or
entities. The information distributed via this protocol is stored by its recipients in a standard Management Information
Base (MIB), making it possible for the information to be accessed by a Network Management System (NMS) using a
management protocol such as the Simple Network Management Protocol (SNMP).
LLDP-MED
LLDP-MED is an extension of IEEE 802.1ab and is defined by the telecommunication industry association (TIA-1057).
LOC
LOC is an acronym for Loss Of Connectivity and is detected by a MEP and is indicating lost connectivity in the network.
Can be used as a switch criteria by EPS
M
MAC Table
Switching of frames is based upon the DMAC address contained in the frame. The switch builds up a table that maps
MAC addresses to switch ports for knowing which ports the frames should go to ( based upon the DMAC address in the
frame ). This table contains both static and dynamic entries. The static entries are configured by the network administrator
if the administrator wants to do a fixed mapping between the DMAC address and switch ports.
The frames also contain a MAC address ( SMAC address ), which shows the MAC address of the equipment sending the
frame. The SMAC address is used by the switch to automatically update the MAC table with these dynamic MAC addresses.
Dynamic entries are removed from the MAC table if no frame with the corresponding SMAC address have been seen
after a configurable age time.
MEP
MEP is an acronym for Maintenance Entity Endpoint and is an endpoint in a Maintenance Entity Group (ITU-T Y.1731).
MD5
211
LANCOM GS-2310P/GS-2326(P) User Manual
A. Glossary of Web-based Management
