A telephony OUI address is a globally unique identifier assigned to a vendor by IEEE. It must be 6 characters long and
the input format is "xx-xx-xx" (x is a hexadecimal digit).
Description:
The description of OUI address. Normally, it describes which vendor telephony device it belongs to. The allowed string
length is 0 to 32.
Add New entry:
Click to add a new entry in Voice VLAN OUI table. An empty row is added to the table, the Telephony OUI, Description.
Buttons:
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved values.
5
All non-telephonic MAC addresses in the Voice VLAN will be blocked for 10 seconds.
3.12 GARP
The Generic Attribute Registration Protocol (GARP) provides a generic framework whereby devices in a bridged LAN,
e.g. end stations and switches, can register and de-register attribute values, such as VLAN Identifiers, with each other.
In doing so, the attributes are propagated to devices in the bridged LAN, and these devices form a "reachability"-tree
that is a subset of an active topology. GARP defines the architecture, rules of operation, state machines and variables
for the registration and de-registration of attribute values.
A GARP participation in a switch or an end station consists of a GARP application component, and a GARP Information
Declaration (GID) component associated with each port or the switch. The propagation of information between GARP
participants for the same application in a bridge is carried out by the GARP Information Propagation (GIP) component.
Protocol exchanges take place between GARP participants by means of LLC Type 1 services, using the group MAC address
and PDU format defined for the GARP application concerned.
3.12.1 Configuration
This page allows you to configure the basic GARP Configuration settings for all switch ports. The settings relate to the
currently selected unit, as reflected by the page header.
Web Interface
To configure GARP Port in the web interface:
1. Click GARP configure.
2. Specify GARP Configuration Parameters.
3. Click Apply.
Figure 3-12.1: The GARP Port Configuration (GS-2310P)
97
LANCOM GS-2310P/GS-2326(P) User Manual
3 Configuration
