The 'Current' column is used to show the active IPv6 configuration.
Figure 4-4.2: The IPv6 configuration
Parameter description:
Auto Configuration:
Enable IPv6 auto-configuration by checking this box. If it fails, the configured IPv6 address is zero. The router may delay
responding to a router solicitation for a few seconds, the total time needed to complete auto-configuration can be
significantly longer.
Address:
Provide the IPv6 address of this switch. IPv6 address is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separating each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a
special syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it
can only appear once. It can also represent a legally valid IPv4 address. For example, '::192.1.2.34'.
Prefix:
Provide the IPv6 Prefix of this switch. The allowed range is 1 to 128.
Router
Provide the IPv6 gateway address of this switch. IPv6 address is in 128-bit records represented as eight fields of up to
four hexadecimal digits with a colon separating each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::'
is a special syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but
it can only appear once. It can also represent a legally valid IPv4 address. For example, '::192.1.2.34'.
4.5 Syslog
The Syslog is a standard for logging program messages. It allows separation of the software that generates messages
from the system that stores them and the software that reports and analyzes them. It can be used as generalized
informational, analysis and debugging messages. It is supported by a wide variety of devices and receivers across multiple
platforms.
4.5.1 Configuration
This section describes how to configure the system log and provide a wide variety of devices and receivers across multiple
platforms.
Web Interface
To configure Syslog in the web interface:
1. Click SYSTEM, Syslog.
2. Specify the syslog parameters includes IP Address of Syslog server and Port number.
3. Activate the Syslog to enable it.
148
LANCOM GS-2310P/GS-2326(P) User Manual
4 System Configuration