5 Security
This chapter describes all of the switch security configuration tasks to enhance the security of local network including
IP Source Guard, ARP Inspection, DHCP Snooping, AAA, etc.
5.1 IP Source Guard
The section describes how to configure the IP Source Guard detail parameters of the switch. The IP Source Guard
configuration can be used to enable or disable ports of the switch.
5.1.1 Configuration
This section describes how to configure IP Source Guard setting including:
Mode (Enabled and Disabled)
Maximum Dynamic Clients (0, 1, 2, Unlimited)
To configure an IP Source Guard in the web interface:
1. Select “Enabled” in the Mode of IP Source Guard Configuration.
2. Select “Enabled” of the specific port in the Mode of Port Mode Configuration.
3. Select Maximum Dynamic Clients (0, 1, 2, Unlimited) of the specific port in the Mode of Port Mode Configuration.
4. Click Apply.
Figure 5-1.1: The IP Source Guard Configuration (GS-2310P)
160
LANCOM GS-2310P/GS-2326(P) User Manual
5 Security
