background image

Parameter description:

Buttons:

Save – Click to save current settings as Backup Configuration.

6.3.4 Restore User

This section describes how to restore users information back to the switch.

Web Interface

To restore a User configuration in the web interface:

1. Click "Restore User".

2. Click "Yes".

Figure 6-3.4: Restore the Backup Configuration

Parameter description:

Buttons:

Save – Click to restore the Backup Configuration to the switch.

6.4 Export / Import

This section describes how to export and import the Switch configuration. Any current configuration file will be exported
in XML format.

6.4.1 Export Config

This section describes how to export the Switch Configuration for maintenance needs. Any current configuration file will
be exported in XML format.

Web Interface

To export a configuration through the web interface:

1. Click "Save configuration".

2. Save the file to your device.

200

LANCOM GS-2310P/GS-2326(P) User Manual

6 Maintenance

Summary of Contents for GS-2310P


























































































































































































































Reviews: