Kyocera TASKALFA 300I, Service Manual

Page: 218 / 408

2K5
1-5-22
4. Insert the locating ball on each of the scan-
ner wires into the hole in the respective
scanner wire drum and wind the scanner
wire three turns inward and four turns out-
ward.
With the locating ball as the reference point,
wind the shorter end of each of the wires
outward.
5. Secure the scanner wires using the scanner
wire stoppers.
Figure 1-5-40
6. Refit the scanner wire drum shaft to the
scanner unit.
7. Insert the two frame securing tools into the
positioning holes at the front and rear of the
scanner unit to fix the mirror 2 frame in posi-
tion.
Figure 1-5-41
Three turns
inward Three turns
inward
Four turns
outward Four turns
outward
Locating
ball
Scanner wire drum
Scanner wire stoppers
Frame securing tool
Frame securing tool
Mirror 2 frame