Kyocera TASKALFA 300I, Service Manual

Page: 100 / 408

2K5
1-3-64
U253
Switching between double and single counts
Description
Switches the count system for the total counter and other counters.
Purpose
Used to select, according to the preference of the user (copy service provider), if A3/Ledger paper is to be
counted as one sheet (single count) or two sheets (double count).
Setting
1. Press the start key.
2. Select the count system.
Initial setting: DOUBLE COUNT(A3/LEDGER)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U260
Selecting the timing for copy counting
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user (copy service provider) request.
If a paper jam occurs frequently in the optional document finisher when the number of copies is counted at the
time of paper ejection, copies are provided without copy counts. The copy service provider cannot charge for
such copying. To prevent this, the copy timing should be made earlier.
If a paper jam occurs frequently in the paper conveying or fuser sections when the number of copies is
counted before the paper reaches those sections, copying is charged without a copy being made. To prevent
this, the copy timing should be made later.
Setting
1. Press the start key.
2. Select the copy count timing.
Initial setting: EJECT
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
ALL SINGLE Single count for all size paper
DOUBLE COUNT(A3/LEDGER) Double count for A3/Ledger size or larger
DOUBLE COUNT(B4) Double count for B4 size or larger
DOUBLE COUNT(FOLIO/LEGAL) Double count for FOLIO/Legal size or larger
Display Description
FEED When secondary paper feed starts
EJECT When the paper is ejected