2K5
1-3-88
U917
Setting backup data reading/writing
Description
Retrieves the backup data to a USB memory from the machine; or writes the data from the USB memory to
the machine.
Purpose
To store and write data when replacing the HDD.
Method
1. Press the power key on the operation panel, and after verifying the main power indicator has gone off,
switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select [Export] or [Import].
7. Select the item.
*1: Since data are dependent with each other, data other than those assigned are also retrieved or
written in.
*2: When ADDRESS BOOK ONE TOUCH is selected, editing with the Set up tool is not possible,
however, Import/Export in high speed mode is possible.
8. Press the start key. Starts reading or writing.
The progress of selected item is displayed in %.
When an error occurs, the operation is canceled and an error code is displayed (see page 1-3-89).
9. When normally completed, [Finished] is displayed.
10. Turn the main power switch off and on after completing writing when selecting [Import].
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display
Description
Export
Retrieving from the machine to a USB memory
Import
Writing data from the USB memory to the machine
Display
Description
Depending data
*1
Address Book
Address book
-
Job Accnt.
Job accounting
-
FAX Forward
FAX transfer information
Job accounting, user management and docu-
ment box information
One Touch
Information on one-touch
Address book
User
User managements
Job accounting
Shortcut
Shortcut information
Job accountings, user managements and docu-
ment box information
Document Box
Document box information Job accountings and user managements
Program
Program information
Job accountings, user managements and docu-
ment box information
ADDRESS BOOK
ONE TOUCH
*2
Address book and Infor-
mation on one-touch
Address book and Information on one-touch
Summary of Contents for TASKALFA 300I
