Kyocera TASKALFA 300I, Service Manual

Page: 217 / 408

2K5
1-5-21
(2-2) Fitting the scanner wires
NOTE
When fitting the wires, be sure to use those specified below.
Machine front: (P/N: 2C912360), gray
Machine rear: (P/N: 2C912350), black
Fitting requires the following tools
Two frame securing tools (P/N 302C968310)
Two scanner wire stoppers (P/N 35968110)
Procedure
1. Remove the screw and remove the scanner
wire drum gear.
Figure 1-5-38
2. Remove the stop ring and bush from the
front of the scanner wire drum shaft.
3. Remove the scanner wire drum shaft from
the scanner unit.
Figure 1-5-39
Screw
Scanner wire drum gear
Scanner wire drum shaft
Scanner unit
Bush
Bush
Stop ring