Kyocera Mita DC-1560, Service Manual

Page: 84 / 289

1AF
2-1-5
Figure 2-1-4 Layout of electrical parts: other electrical parts
1. Halogen lamp (HL) ............................................. Performs exposure.
2. Cleaning lamp (CL) ............................................ Removes residual charge from
the drum surface.
3. Blank lamps (BL) ............................................... Remove charge from non-image
forming areas of the drum
surface.
4. Fixing heater (H) ................................................ Heats the heat roller.
5. Fixing unit thermostat 1 (TH1) ........................... Prevents overheating in the fixing
section.
6. Fixing unit thermostat 2 (TH2) ........................... Prevents overheating in the fixing
section.
7. Optical section thermostat (TH3) ....................... Prevents overheating in the
optical system.
8. Total counter (TC) .............................................. Displays the total number of
copies produced.
9. *Solid state relay (SSR) ..................................... Controls the fixing heater.
* For 230 V specifications only.
Machine front Machine inside Machine rear
7 9
8
2
4
3
5,6
1