• Check that the power cable covering is free of damage. Check that the
power plug is dust-free. If it is dirty, clean it to remove the risk of fire or
electric shock. .........................................................................................
• Never attempt to disassemble the optical unit in machines using lasers.
Leaking laser light may damage eyesight. ..............................................
• Handle the charger sections with care. They are charged to high
potentials and may cause electric shock if handled improperly. .............
CAUTION
• Wear safe clothing. Avoid wearing loose clothing or accessories such
as ties which may be caught in rotating sections. ...................................
• Use utmost caution when working on a powered machine. Keep away
from chains and belts. .............................................................................
• Handle the fixing section with care to avoid burns as it can be
extremely hot. .........................................................................................
• Check that the fixing unit thermistor, heat and press rollers are clean.
Dirt on them can cause abnormally high temperatures. .........................
• Do not remove the ozone filter, if any, from the copier except for
routine replacement. ...............................................................................
• Do not pull on the AC power cord or connector wires on high-voltage
components when removing them; always hold the plug itself. ..............
• Do not route the power cable where it may be stood on or trapped. If
necessary, protect it with a cable cover or other appropriate item. ........
• Treat the ends of the wire carefully when installing a new charger wire
to avoid electric leaks. ............................................................................
• Remove toner completely from electronic components. .........................
• Run wire harnesses carefully so that wires will not be trapped or
damaged. ................................................................................................
Summary of Contents for DC-1560
