Kyocera Mita DC-1560, Service Manual

Page: 129 / 289

3-2-7
1AF
Sim.
Description Remarks
No.
4. Press the print key. The new setting is stored.
5. Press the stop/clear key.
06 Checking ADF operation
1. Enter 06 with the numeric keys.
2. Press the print key.
3. Press numeric key 0, 1 or 2 to start ADF operation
check.
4. Press the stop/clear key.
09 Setting shipping defaults
1. Enter 09 with the numeric keys.
2. Press the print key.
3. Press the all clear/reset key. The lens in the lens
unit moves to a position 752 pulses from its home
position and light source unit 1 to a position 3552
pulses from its home position.
4. Turn the main switch off.
10 Turning the drive motor on
1. Enter 10 with the numeric keys.
2. Press the print key. The drive motor and developing
bias turn on, performing toner density control on the
developer.
3. Press the stop/clear key. The operation stops.
Numeric key Operation
0 Feeding originals continuously
1 Feeding a single original
2 Ejecting originals
Check ADF op-
eration with or
without originals.
To be run before
moving the ma-
chine.
Check the drive
and paper con-
veying system
operations.
05
(cont.)