Kyocera Mita DC-1560, Service Manual

Page: 193 / 289

1AF
3-3-37
(12) Adjusting exposure amount for enlargement/reduction mode
Make the following adjustment after (8) Setting the exposure amount has been completed.
Procedure
Yes
No
Start
Enter simulation mode.
Enter 29 with the numeric keys.
Change the setting with the
zoom-up/down keys.
Increase the value if the
image is abnormally dark.
Decrease the value if the
image is abnormally light.
Press the print key.
The new setting is stored.
Press the stop/clear key.
Exit simulation mode.
Setting range: 102 to 243
References: 166 for enlargement copy
170 for reduction copy
End
Press the all clear/reset key.
Press the print key to make a
test copy.
Select the mode to be adjusted
with the paper select key.
Place the NTC on the contact
glass and ensure A3/11"
×
17"
paper is present.
No
Yes
Press the print key.
Adjust for another mode?
Is the copy image correct?
Mode 1: enlargement copy
Mode 2: reduction copy